Blog Home

The Radial Arm Saw-The Radical Power Tool

Written by admin on October 27, 2008 – 10:32 am -

The radial arm saw is made up of a motor just like a circular saw and it is suspended from a long arm with a yoke. This lets the saw rotate at multiple degrees. The motor connects to the overhead arm and all parts can be locked down or left to pivot. This saw gives the woodworker a great deal of flexibility in the cuts that can be achieved. DeWalt was the first on the market and it continued making this saw up until 1989 when the rights were sold to the American Saw Company. Sears has been making radial saws since 1958 and Delta entered the marked back in 1948. The versatility of this Power Tool is the reason this saw remains so popular.. It can rip, cross cut, and it can do rabbet cuts and miter dado. By adding on of the many attachments and... more


Tags: , , ,
Posted in Radial Arm Saws | No Comments »

The Router-The Creative Power Tool

Written by admin on October 27, 2008 – 10:25 am -

“The Router-The most versatile and safest of all woodworking         Power Tools“. The Router is a high speed Power Tool, with speed of from 20,000 to 27,000 revolutions per minute, depending on the model.  The most popular sizes for the home workshop woodworker weigh about 6 pounds.  It has a universal 115 volt motor, although other voltage motors are available.  The manufacturers, who had been supplying professional woodworkers with these Power Tools for many years decided (rightly) that only light compact models would satisfy the average person.  The result is a tool that is easy to handle even for the novice in the power tool field. What does a router do? The router cuts into and trough wood and many other materials... more


Tags: , ,
Posted in Woodworking routers | No Comments »

The Bench Saw-The cannot do without Power Tool

Written by admin on October 27, 2008 – 10:07 am -

The bench or table saw is one of the most useful of all woodworking Power Tools. Its will prerform a great variety of sawing operations, perhaps more than 75% of all that are required in cabinet making.  It is probably the first large Power Tool that most people will want in their home workshop. Today the selection of table saws number in the thousands.  Every body and his brother are manufacturing table saws.  Some are better than others but all are basically the same design.  Naturally price is a great consideration but the price will not change the basic design only the actual manufacture of the saw generally changes.  Better controls, scales for tilt and lock of the blade and adjustment to alter the depth of cut.  The fence and the... more


Tags: , , ,
Posted in Table Saws | No Comments »

Woodworking Lathes-A Fun Power Tool

Written by admin on October 27, 2008 – 10:00 am -

Of all power tools, the lathe will probably give you the greatest opportunity and satisfaction in developing creative skill in woodworking. The lathe will enable you to make delicately turned spindles, legs, vases, spirals, beautiful lamp bases, and just about anything you can imagine. The wood-turning lathe or speed lathe essentially consists of a bed, a headstock, a tailstock and a tool rest. Its size is determined by the diameter of the work that can be turned over the bed and the length of stock that can be turned between the centers. Power on modern lathes is delivered to the headstock by an electric motor. Variable speeds are obtained by turning a dial or by changing the belt position on a step-cone bulley system located on the headstock.... more


Tags: , ,
Posted in General Woodworking Posts | No Comments »

The Drill Press-The hole story

Written by admin on October 27, 2008 – 9:55 am -

THE DRILL PRESS Not too long ago, the drill press, as we know it today, was considered a machine strictly for drilling holes in metal.  From this limited application,the modern versatile power tool has advanced to a point where it is now to be found in all kinds shops performing a multitude of operations.  Besides its original job of drilling in metal, it now is used on wood and other materials for boring,  mortising, routing, shaping, planing, sanding and grinding.  It can also be used for spot polishing, tapping threads, buffing, and even for some limited milling. The four basic parts of a drill press are a polished steel column, secured to a cast iron base, a table which can be moved up and down on the column and clamped at any point,... more


Tags: , , ,
Posted in Drill Press | No Comments »

Woodworking Shop- Your Power Tool Home

Written by admin on October 27, 2008 – 9:48 am -

Your woodworking shop is home to all your Power Tools. Proper layout will make your woodworking shop more productive and more enjoyable.  Plan the layout carefully.  Sure you’ll make changes as you go, but if you have a plan down on paper you’re not likely to make serious blunders.  You will get built-in cabinets aned shelves where they will do you the most good.  You will get lumber storage where it will be most convenient and the least fire and safety hazard.  You will get the kind and size of power tools you can properly accommodate. Here is how to go about setting up a lay-out. First, make an accurate scale drawing of your shop area, indicating features such as windows, doors, stairways, posts.  A scale of 1/4 inch to 1... more


Tags: , , ,
Posted in Woodworking Plans | No Comments »

The Band Saw- A must have Power Tool

Written by admin on October 24, 2008 – 3:09 pm -

The Band Saw is one of the oldest Woodworking Power Tools. The band saw was created and patented in England in 1808. Band saws are now available in many sizes varying from the smallest,such as the little bench models with 9=inch wheels to the giants used in mills that at are 84 inches and more in diameter.  The blades on those monsters are as much as 16 inches wide and 50 feet long. The name “band Saw” indicates a cutting blade that is actually a narrow,flexable,endless band of steel with teeth on one side.  This blade runs over revolving wheels or pulleys which have rubber tires stretched over their rims. The size of a conventional band saw is indicated by the diameter of each of its two wheels.  For example, an 18 inch band... more


Tags: , , ,
Posted in Woodworking Band Saws | No Comments »

Hello Redneck Woodworkers!

Written by admin on August 22, 2008 – 5:27 pm -

Power Tools: We have come a long way Baby! More power for our power tools, yep power makes all the difference. Or does it? My father was a true craftsman. He wasn’t a professional wood worker and he sure didn’t have the shop full of power tools we have today,but he built fantastic projects with the tools he owned. We didn’t have a lot of money so it was often necessary for him to build furniture for our use at home. Beds, dressers, frames, cabinets all were built with the tools at hand. I never heard him wish for something more than he had when he started a difficult project. His shop was in a small garage that required him to leave the car parked in the street while he worked. He had hand tools, an old table saw that he had... more


Tags: ,
Posted in General Woodworking Posts | No Comments »
Newer Entries »